Sodium Carboxymethyl Cellulose Ceramics Grade

GradesGAC-1 to GAC-6, GAC-CH
Viscosity (1%)200–1,700 mPa·s
Degree of substitution≥ 0.80 to ≥ 1.0
Purity≥ 95%
Instant-solubleGAC-5, GAC-6

Product overview

Ceramics-grade sodium CMC is a high-purity binder and suspending agent for glazes and ceramic bodies. It keeps glaze slurries stable, improves green strength and helps the glaze adhere evenly.

Grades and specification

GradeDegree of substitutionViscosity, 1% Brookfield (mPa·s)
GAC-1≥ 0.95300–500
GAC-2≥ 0.90800–1,200
GAC-3≥ 0.95200–400
GAC-4≥ 0.80800–1,200
GAC-5 (instant soluble)≥ 0.95500–700
GAC-6 (instant soluble)≥ 0.95800–1,000
GAC-CH≥ 1.01,500–1,700

Purity ≥ 95%, pH 6–8, moisture 7–10%. Values are from our current product data. Confirm the exact grade and limits with the TDS and the COA of the lot you test.

Applications

  • Glazes: suspension, smooth application and adhesion to the body
  • Ceramic bodies: binder that raises green strength
  • Printing pastes for tiles: rheology control

What CMC does in glazes and bodies

In a glaze, CMC keeps the frit and mineral particles suspended, slows settling in the tank and gives the dried glaze layer enough strength to handle before firing. It also improves adhesion of the glaze to the body and reduces pinholes caused by uneven drying. In the body, a small addition raises green strength so pieces survive handling and decoration. CMC burns out completely during firing.

ApplicationUsual gradeNote
Glaze slurries for spraying or dippingGAC-1, GAC-3 (200–500 mPa·s)Stable suspension without making the glaze too thick
Thicker glazes and engobesGAC-2, GAC-4 (800–1,200 mPa·s)More body and adhesion
Fast make-down in the plantGAC-5, GAC-6 (instant soluble)Disperse without lumps, shorter mixing
Printing pastes for tilesGAC-CH (1,500–1,700 mPa·s)High viscosity, DS ≥ 1.0

A higher degree of substitution (0.9 and above) gives a smoother solution with fewer gels and better tolerance of salts released by the frit.

How to choose a grade

Use high-DS grades for glazes that must stay stable in storage, and instant-soluble grades where fast make-down matters.

Packing and documents

25 kg multi-wall paper bags with an inner PE liner. Other packing is agreed per order. TDS, SDS and a representative COA are available for every grade, and each lot ships with its COA. Request documents or a sample.

Related products

Related guides

FAQ

What viscosity for a glaze?

Most glazes use 200–500 mPa·s grades (1%). Thicker glazes or bodies may need 800–1,200 mPa·s.

Do you supply instant-soluble or granular CMC for ceramics?

GAC-5 and GAC-6 are instant-soluble grades. Tell us if you need a granular form and the mesh size; we confirm what we can supply.

How much CMC goes into a glaze?

Usually a few tenths of a percent of the dry glaze weight. The right level depends on the glaze, the application method and the viscosity you need.

Why does DS matter in ceramics?

Higher-DS CMC dissolves more completely, gives fewer gel particles and is more stable when salts are present in the glaze.